This mash column is made of food grade AISI304 stainless steel and M1 copper. Pipe diameter 51 mm. The assembled height is 820 mm, which allows you to obtain high-quality distillate from mash with a strength of up to 96%.
Included items
The column package includes the following elements:
- Copper drawer 2 inches long 500 mm
- Copper reflux condenser 2 inches long 200 mm with 9 tubes of 10 mm each and 3 baffles
- Copper turn with nipple 1 pc.
- Stainless steel turn (without nipple) 1 pc.
- Thermometer 1 pc.
- Stainless steel cooler 2 inches long 400 mm with 9 tubes of 10 mm each and 5 baffles
- "Spout" with a communication tube with the atmosphere 1 pc.
- Clamps 2 inches with gaskets 6 pcs.
- OLTC copper 5 pcs
- Instructions
- Plumbing kit:
- Plastic needle taps 2 pcs
- Quick releases brass 2 pcs.
- Plastic tees 2 pcs
- Polyurethane hose 4 m
- Silicone hose 1 m
- Fum tape 1 pc.
Characteristics
- Assembled height: 820 mm
- Dephlegmator height: 200 mm
- Number of tubes in the dephlegmator: 9
- Diameter of tubes in the dephlegmator: 10 mm
- Number of partitions in the dephlegmator: 3
- Dephlegmator power: up to 2500 W
- Cooler height: 400 mm
- Number of tubes in the cooler: 9
- Diameter of tubes in the cooler: 10 mm
- Number of partitions in the cooler: 5
- Cooler power: up to 7000 W
- Copper pipe diameter: 42 mm
- Clamp: 2"
- Tsar height: 500 mm
- Quick release fittings: 1/4" for 10 mm hose
- Food grade stainless steel AISI304, copper grade M1
- Power depends on the temperature of the water supplied, the method connection, water supply speed and other factors
- Speed in the first stage mode (PotStill): up to 12 l/h
- Speed in re-distillation mode: up to 3 l/h (recommended)
Note
Distillation speed depends on the power of the heater and can only be limited by your heater (within reasonable limits).
Parameters with packaging (L/W/H, weight)
To write a feedback