Set for connecting to a gas cylinder, 37 mbar reducer, 200 cm hose and fitting

Kit: gas hose 200 cm, reducer GOK 37 mbar, herringbone fitting Ø10 mm, thread 1/2", reinforced clamps. pressure regulator). Thus, for the operation of Enders gas equipment, you only need a filled gas cylinder. And for customers , which have gas equipment from other manufacturers, not equipped with a reducer and hose, we have sets for connecting it to gas cylinders. for a gas cylinder, it is a universal pressure stabilizer, it is an indispensable part of gas equipment. The pressure at the outlet of a gas cylinder is not regulated and depends from various factors, therefore, between the gas equipment and the gas cylinder, connected by a gas hose, there is a reducer (gas pressure regulator). The devices operate at a fixed pressure, and in order for the gas pressure at the outlet of the cylinder to correspond to the pressure at the entrance to the device, there is a gas reducer that reduces the pressure to the required level. The installation process is easy with the help of clamps included in the kit. The kit is also equipped with a threaded fitting. The reducer has an output pressure level of 37 mbar. It is important that the output pressure of the reducer corresponds to the required pressure of the gas appliance, which is usually described in the technical documentation supplied with the equipment. In any case, we advise you to consult with our specialists before buying.