Tena power regulator Version 1.0
With the help of this regulator, you can smoothly adjust the power of the tone from 0 to 100%. The regulator has a liquid crystal screen, which displays the following data:
- the current voltage, which is applied to the tank
- current power consumption of the heater (can be reduced using the regulator)
- the current passing through the ten
- the number of kW hours spent on this distillation (you can reset to zero before each distillation)
This device is designed to work with batteries up to 3.5 kW.
The power regulator 1.0 is connected to the automatic start-stop (of our production).
Coupled with automation, the power regulator can work as a temperature cut-off.
Example:
When racing in the bedding mode, you want the tan to turn off when the temperature in the cube reaches 99 C. On the automatic start-stop, you can set the temperature to 99 C and connect the power regulator 1.0 to the automatic strat-stop. In this way, you will be able to control the power of the heater, have information about the number of kilowatt hours,
spent on distillation, as well as at the end of distillation, reaching the set temperature, the tan will turn off.
To write a feedback